SAM 200 Semi-automatic Bag Slitting Machine
The Beltyne SAM 200 semi-automatic bag slitting machine caters for the low volume throughput market. The unit handles all types of bags at a maximum rate of 200 bags per hour.
Simple one man operation.
Compact simple design.
Maximum bag size up to 1000mm x 550mm x 250mm for standard unit, larger units available to suit larger bags.
All types of bag materials catered for i.e. paper, plastic, hessian, poly woven all with or without inner liners.
Integral compactor unit.
Optional pulse jet dust extraction unit.
Technical Specification
All carbon steel construction with optional stainless steel construction.
Electrical requirement - 4Kw - 3 Ph - 50/60Hz
Pneumatic requirement - 40 cubic meters per
hour @ 5 bar.
Machine pre-wired for installation purposes.
Weight: 150kg
Standard IP55 specification with full optional hazardous area equipment.

General Method of Operation

The operator opens access door and pushes the bag from the loading plate directly onto the internal bag support table. The door is then closed and the operator presses the start pushbutton which engages the door lock for safety interlock.

From then onwards the bag is automatically cut open, the product discharged out of the machine and the empty waste bag is automatically transferred to the integral compactor unit which compacts the bag into a receiving tube. Upon completion the door latch disengages and allows the loading of the next bag.

Morray Engineering Group, building quality equipment - in Britain
Morray Engineering Group, building quality equipment
- in Britain

Beltyne Engineering
Walthambury House, Cressing Farm, Witham Road, Cressing, Braintree, Essex CM77 8PD
Main Contact number: 01376 322722 (8:00 am until 5:00 pm, Mon-Fri ) Alternative Contact number: 01376 552020

W J Morray is a division of The Sack Filling and Robot Palletising Company Ltd.
Registered office Bury Lodge, Bury Road, Stowmarket, Suffolk, IP14 1JA Registered number: 07705339

This website and its content is copyright of WJ Morray Engineering - © WJ Morray Engineering 2012. All rights reserved.